Cruiser GROMMET Setting DIES, CRUISER SPUR

: Use Your Credit-Card Or PayPal Securely :

SELECT Item below . . . Then ADD-To-Cart

Professional Workroom Tools ~

TOOLS & DIES For CRUISER Grommets : HOLE CUTTERS below
Cruiser Grommet HAND SETTING DIES, Grommet HOLE CUTTERS, CRUISER SPUR Grommet DIES

Grommet Pro TOOLS, DIES, & CUTTERS
GROMMET SIZING CHART:      Size-Number = HOLE-Diameter
SIZE #00=3/16"Hole-Diameter    #0=1/4"Hole    #1=9/32"Hole   #2=3/8"Hole < Most Popular    #3=7/16"Hole
#4=1/2"Hole    #5=5/8"Hole    #6=3/4"Hole    #7=29/32"Hole    #8=13/16"Hole
Osborne-series (Standard sizing) ~ Cruiser-series (Euro/Metric sizing)
[ Prev ] < GROMMET TOOLS >  [ Next ]

CRUISER PLAIN GROMMET Hand Setting DIES

Each set consists of two parts, the punch and the die. Note that the spur and plain dies are Not interchangeable, you must have the specified die for each type. Never strike a cutter or die with a metal hammer. Always use a Rubber or Composite mallet for hole-punching or setting grommets or fasteners. Do Not Use a steel hammer to strike, such a severe blow will make the metal in the dies absorbs the entire shock and begin to crystallize.
#J-For Cruiser PLAIN-Grommet Hand-Setting Dies

$179. Each

Sz#1 PLAIN DIE Cruiser

$189. Each

Sz#2 PLAIN DIE Cruiser

$199. Each

Sz#3 PLAIN DIE Cruiser

For CRUISER-type
PLAIN GROMMETS

NOT FOR
Cruiser-SPUR
Grommets
See Other DIES
(Below)

NOT FOR
OSBORNE-Type
Grommets
See Other DIES
HERE

Select "ADD To CART"... Type QUANTITY & Update

CRUISER SPUR-GROMMET Hand Setting DIES
Each set consists of two parts, the punch and the die. Note that the spur and plain dies are Not interchangeable, you must have the specified die for each type. Never strike a cutter or die with a metal hammer. Always use a Rubber or Composite mallet for hole-punching or setting grommets or fasteners. Do Not Use a steel hammer to strike, such a severe blow will make the metal in the dies absorbs the entire shock and begin to crystallize.

#J-For Cruiser SPUR-Grommet Hand-Setting Dies

$179. Each

Sz#1 SPUR DIE Cruiser-type

$189. Each

Sz#2 SPUR DIE Cruiser-type

$199. Each

Sz#3 SPUR DIE Cruiser-type

Cruiser GROMMETS

NOT FOR
Cruiser-PLAIN
Grommets
See Other DIES
(Above)

For CRUISER-type
"SPUR" GROMMETS

NOT FOR
OSBORNE-Type
Grommets
See Other DIES
HERE

Select "ADD To CART"... Type QUANTITY & Update

Pro HOLE CUTTERS For Grommets

Note that cutters will work with either the Cruiser or the Osborne grommets, simply size them to the hole you need either by diameter or by grommet Size number. Be sure to use with a soft surface underneath, ideally a hole cutting pad. Never Strike a cutter with a metal hammer, Always Use a Rubber or Composite Mallet for longer life of the tools. #Specialty - Grommet HOLE CUTTERS

$59. Each

For Size #00 Grommets 3/16"D

$59. Each

For Size #0 Grommets 1/4"Dia.

$59. Each

For Size #1 Grommets 9/32"D

$59. Each

For Size #2 Grommets 3/8"Dia.

$69. Each

For Size #3 Grommets 7/16"D

$69. Each

For Size #4 Grommets 1/2"Dia. hole

$69. Each

For Size #5 Grommets 5/8"Dia.

Works For EITHER
Osborne Or
Cruiser-type
Grommets

Professional
HOLE-CUTTERS

For Hole-Cutting PADS,
Go HERE

Select "ADD To CART"... Type QUANTITY & Update

[ Prev ] < GROMMET TOOLS > [ Next ]

SHIPS DOMESTICALLY In USA -or- In Canada (No Border-Crossing Required)

CSC ~ Founded by Veterans.